Owner manual

77
11.3 Dashboard (Web RCS)
On the Web RCS, you have access to a chart with global informaon on the unit.
Please click on the Dashboard buon:
On this chart, you will nd under the INFO tab, the Device name, the
Serial number of your product, the actual rmware and the soware
version of the Web RCS.
Under CONNECTIVITY, you will nd the current IP address of your unit
and its MAC address.
Then you nd an some RED/GREEN alarm which give you informaon
about the unit connecvity.
If it is GREEN:
 your unit is connected to your internet network
Web RCS: your unit is connected to a Web RCS, it gives you the number of connecons
Link: your unit recognize other SmartMatriX Ultra unit on the network..
Web: your unit is actually connected to the web (web update is available)
a  remote controller is detected.
Sync: Synchronizaon is established with a controller.
If it is RED:
Your unit is not connected to the specic eld.
Under STATISTICS, you can overview your SmartMatriX Ultra use informaon. Find the running me since
the last boot, or the total running me since you bought the unit. Running Cycles, stored presets number,
stored Logos number and stored input sengs informaon are also available.
11.3 