Owner manual
60
8.1.1 LCD screen
8. OPERATING THROUGH THE FRONT PANEL
8.1
The SmartMatriX Ultra oers a LCD screen on the front panel which allows you to always have an overview
of your sengs. The LCD screen is a 4,3” diagonal size and a 800x480 pixels resoluon.
Analog Way developed an ergonomic HMI to help customer to setup the unit with the help of the front panel.
You will nd same sengs into the front panel menu and into the Web RCS. Please refer to the specic seng
chapter menu if you need accurate explanaon on a seng.
Please take a look at the menu tree if you want to
have a clear view of all available menus.
On the LCD you will nd all menus around a text
area. This text area describes the selected menu.
To navigate into menu, simply turn the scroll knob
to the chosen directory/menu and press ENTER
buon to enter into the menu or validate the
seng. You can use the EXIT menu at any me
to perform a step back into the menu structure.
CONTEXTUAL BUTTONS:
Four contextual buons were put in place to help you to overview the state of your unit.
• The top one and the last one contextual buons allow the customer to quickly navigate into the menu
architecture. By clicking on those buons, the cursor is now on the top menu list, and then using the scroll
knob, you can choose to come back directly at the home menu, or choose the directory you want. Then
click ENTER to validate your choice
• The second one is the dashboard shortcut. Pressing this buon, you have access to the dashboard, all main
informaon on your device.
• The third one is the ABOUT shortcut. Click on this buon to have more informaon about Analog Way
SmartMatriX Ultra unit.
• The fourth buon will display a specic Layer’s summary window.
On some specic menus, the Contextual buons have dierent funcons:
• The contextual buon 2 and 3 can display the text: Program and Preview. Depending on the modicaon
you will apply, select the PROGRAM or the PREVIEW contextual buon in order to apply your seng on
the Program or Preview preset.
The front panel buons provide you a full access to your layer/source and preset. (See the front panel
descripon at chapter: 5.1.2 Front panel)
First of all select your SCREEN number, in order to know on which screen you will do the modicaon
Don’t forget to always check on which screen you are doing the setup.
Then select the PROGRAM or PREVIEW buons, in order to choose on which preset you will work.
8.1.1 LCD screen
8.1.2.1 Standard use