Owner manual

53

The layer layout gives you access to a lot of predened preset paerns with 1 or 2 PIPs already sized and
placed into the output. It can help you to quickly set up 2 PIPs side by side for example.
Once clicking on the layout buon, you have access to the preset with 1 or 2 PIPs.
Two other opons are available below:
-  layers already displayed and not included into
the chosen layout will be cleared
-     layers already displayed and not included
into the chosen layout will be faded out during the transion. They
are sll present on the preset but with a 100% transparency.
Aer having selected the layout, the changes are applied on the Preview screen. The size and posion of
all layers have changed. Of course you can sll manage the new preset by posioning or resizing each layer
thanks to the white circle around it.
NOTES:
1/ You cannot dene your nave background SET into this secon, you can only load it. If you want to modify
your set, you have to go to the SETUP > PRECONFIGURATION > SETUP ASSISTANT MENU.
2/ A set is aected to a preset (Preview or Program), in that way you can do transion between 2 sets of
nave background, simply load set 1 into the Program and then load set 2 into your Preview.
7.4.4 Layer selecon and nave background


You can choose between several aspect rao. Once selected, the new aspect rao is applied
on the selected layer.
A layer posion shortcut is also available. Aer having selected a layer, simply click on the
Pos. buon to have quickly access to a layer posion. Choose the new posion. The change is
applied straight away on your preset.