Owner manual

43
7.3.12 Condence management

The condence management allows a
lot of sengs on your condence out-
put. First of all you need to set up one
of your output as a condence output.
To do that, please go under the pre-
cong menu, then “screens”. Select one
of your screens and enable the “SET AS
CONFIDENCE” buon. The condence
buon is only available on Program
screens.
Then come back to the condence tab into the condence menu:
You can choose the margin between each windows of your condence output.
You have to possibility to choose the background color too.
Click on your screen number to have access to all available layouts:
Groups of 4, 3, 2 or 1 windows layouts are available. Please select the layout you want to display on your
condence output.
Then you can manage the content for each windows. Program and input are available to ll the windows. For
each windows number, select in the list the content you want to display.
Aect all your slots to an image in order to have all your slots lled:
Remember that you will have access to this menu at any
me. Those 8 slots can be loaded with another images
in the future.