Owner manual
42
7.3.11 Logo management
Please choose your frame under the library images to access a lot of sengs:
Enable or not this slot.
Shows you if the nave background is enabled and which output is chosen. You can
change this parameter into the Setup assistant only.
Rename this frame
Allows you to see the resoluon and a quick snapshot of the logo/frame
Set up the aspect In, Out and crop your frame.
To upload an image from a le, just posion your mouse on the
selected number frame.
Then click on the upload buon: and you will get the following window for let-
ng you upload the le from your computer directly to the library on the unit.
Then choose your Logo/Frame into your directory, press open to load it.
To be able to use those Logos please refer to the chapter 7.4.6. Logos and Frames
management.
To use sll image(Frame)/Logo with this device,
you have access to 8 fast slots. Those slots can be
loaded thanks to the image library.
To have access to the all library of images, simply
click on Frame1 or to the “Setup” shortcut, available
on each slot.