Owner manual

40
7.3.9 Input management
Mask   
No mask Transparent Original pixels color Original pixels color
Black & white Black White Grey
Red & blue Red Blue Grey
KEYING ASSISTANT:
To enable the keying assistant click on:
Then use the white square to dene an area which exemplies the color you want to key.
NOTE: You can use shi on your computer keyboard in order to size the white square.
For the rst applicaon, we advise you to reset all the previous keying sengs. Click on
RESET to reset all previous sengs.
To start deleng, move your white square on your live image and then press ADD AREA. You
can add several areas.
At any moment you can freeze the live content of your source using the
FREEZE buon.
Mask opons are available if you want to visualize the keyed content
versus the non keyed content. The pixel color replacement used in each
mask opon is described in the chart below.
HOW TO USE THE LUMA KEYING:
Select the lumakiller and then adjust manually, or using to the
assistant, the luma level:
Manually: Set the Luminance value or select it with the color
panel clicking on 
Then adjust to tolerance to increase the range of luminance
levels around your reference luma.
NOTE: The masks are really useful for conguring the Cremae keying, see below.
ASSISTANT:
The easiest way to nd the exact luma you want to remove is to use the
assistant. Simply move the white square to an area you want to remove and
click on ADD AREA to determine the correct luma value.
Only for CremaTTe®