Owner manual
38
7.3.9 Input management
Enable/disable the 2:2 feature. Let it enable by default. The 2:2 is useful because it launches a specic
frame/line algorithm when 2:2 content is played.
Enable/disable the 3:2 feature. Let it enable by default. The 3:2 is useful because it launches a specic
frame/line algorithm when 3:2 content is played.
Next you have the ASPECT tab. All sengs about the blanking and aspect rao are available there:
In this tab, you can dene what is exactly the input format. The input
format is automacally detected by the SmartMatriX Ultra but you can
change it or force it. The available formats are close to the current one, in
terms of lines. This is available only for analog computer formats.
The next tab is the USER FORMAT:
Next sengs available on the ASPECT tab are:
use the Top, Boom, Le and Right values to crop your
input. A nder is also available, when acvated, use the white
rectangle to set up accurately the cropped area.
- ASPECT IN: Select the correct aspect rao of your input (5:4 4:3 etc…). This seng doesn’t exist when the
input is set as nave.
Choose a specic cropped rao if you use a source with black bands on top/boom
or le/right
Dene the way the image will be displayed into a layer (full screen, centered, cropped or 1:1)
Choose to apply or not a predened zoom on the image (use with video signal)
You can manually adjust the input
blanking with the V&H size or posion.