Owner manual

33
7.3.7 The miscellaneous secon
Then in the NATIVE BKG setup menu you can register up to
8 sets of nave Background per screen.
For each set you can choose:
Input source, Frames or color.
Then you can choose the posion as well:
The posion will be important in the case you choose a Frame/input which has a smaller
resoluon than the output resoluon, your nave background will be place according to
this chosen posison.
Select for each set the desired nave background. Load every set clicking on the set number to be sure your
nave background are well setuped. Don’t forget that you can come back to this secon at any me during
your show to dene new nave input or new set.
 By default, the SmartMatriX Ultra will swap the Program and Preview buses during each
TAKE. Enabling this opon will leave the Preview bus unchanged during each TAKE, and only the Program
will be updated.
Enable or disable the automac recognion of black band for digital content. The size and
the aspect rao are automacally adapted.
Change between 3 ways of displaying the Preview during transion.
 Color of PIPs when the source is set to color
Replacement color when input keying DSK is enabled.
 This is the duraon of the auto fade In/fade Out. (See faders in chapter: 7.4.4 Eects)
 Enable or disable access to the mirror eect. (See mirror in chapter: 7.4.4 Eects)
(only useful when using Mul-screen mode).
