Owner manual

29
7.3.1 Internal rate
Go to the Setup secon to start to set up
your unit. A Setup assistant is available
to help you to correctly adjust all basic
setups of your unit.
7.3 Setup
Into the internal rate secon, you have to dene the global internal rate of the unit. This will be the output
rate of your Program output. This rate can be dened:
7.3.1 Internal rate
• By choosing to follow one of the inputs: you have
to select the input from where the output rate will
be copied [INPUT]
• Internally by the unit: you can dene the internal
rate as 25Hz, 50 Hz, 60Hz … [INTERNAL]
• By choosing to follow the dedicated framelock
input [FRAMELOCK]