Owner manual
Contextual
buons
Menu scroll knob
access Frame #1 to
#4 or Logo #1 to #4
ll in a layer with a color
- 6 x HDMI
- 9 x DVI-I
(Dual link available on Inputs 2, 6 & 10)
- 3 x DisplayPort
(Dual link available on Inputs 4, 8 & 12)
- 12 x 3G/HD/SD-SDI
- 12 x Universal Analog
(6 x HD15 & 6 x DVI-A)
- 4 x Universal Analog (HD15 & DVI-A)
- 4 x DVI-I (DVI Dual-Link on outputs #1 & #3)
- 4 x Video Opcal SFP module cage
- 4 x 3G/HD/SD-SDI
not scaled layer.
scaled layers
The allows an
using in fast roung mode.
Please read the instrucons in the
User Manual
edit Program
edit Preview
Recall the last preset into
your Preview monitor
4.3’’ TFT color display
Hold for 3 seconds for
stand-by mode to force power o
USB Plug
Ethernet Plug
Tally
Analog Frame
Lock input and
loop output
Use the 3 link cables to share
inputs/outputs in the addive
modularity conguraon.
Home menu
or back one level
validate the menu
or command
100-240 VAC; 8A;
50/60Hz; 285W; internal,
autoswitchable
Reserved for
manufacturer
4 x USB Plugs
Used for eect sync in
mul-machine mode.
See User’s Manual for details
load a preset
save a preset
Transion the pre-selected
sources onto the Program
output with the selected eects
- 1 x Universal Analog (HD15 & DVI-A)
- 1 x DVI-I
- 2 x SD/HD/3G SDI
- 1 x RGBs/RGsB/RGB/YPrBr/YC/comp
Analog output
clear a layer
adjust
Layer properes
press before selecng the
Logo/Frame number
freeze the input linked to the
current layer on the Program
select a screen
The user should avoid disconnecng the power source
(AC input) unl the unit is in stand-by mode. Failure to
do this could result in hard drive data corrupon.