Owner's manual

45
1/ Click on the Image tab of the RCS interface. The empty Image
screen will appear on screen.
2/ By clicking on the drop-down menu in the Preview section, situated
next to the layer you wish to use as a PIP, you will access the image
parameters of the PIP source you select (1-10).
3/ Set the desired PIP attributes (size, position, zoom, border,
transparency...).
4/ Click the Image tab to return to the main screen.
PIP conguration
Layer transitions & effects
The Smart Vu offers a wide variety of transitions between the scenes
you create for your shows and events. It allows for live recall of 4
user presets, each of which you can edit at any given time.
1/ In the Layer Selection section, click the PIP button. On your Preview
screen, PIP1 will appear as a color rectangle. The parameters of the
layer will automatically appear in the RCS Preview section.
2/ At the bottom of the Preview section, click on the Transition tab,
then select the transition type from the left dropdown menu, and the
effect behaviour from the right dropdown menu.
3/ Determine effect duration by sliding the duration bar left (shorter)
or right (longer), or by manualy setting the value in the duration
value box.
3/ Repeat the procedure in the Closing Effect tab to determine the
way your layer will close.
The Smart Vu allows the creation of user dened presets very
easily. Any setup you have congured on screen, can be stored into
one of the 4 available user presets.
1/ After having congured layers, PIP transitions, logos... on your
screen (see “Working With the RCS” chapter, p. 42), click on one of
the four available Preset buttons.
2/ In the dropdown menu, choose Save From Main or Save From
Preview to determine which screen you want to memorize the preset
from.
3/ By clicking one of the two options, the RCS will automatically load
and preview the selected Preset.
4/ Click the Take button to view your preset on the Main screen.
Creating presets