User guide

1/ In the MENU section, press the EXIT/MENU button and select Input in the menu by rotating the scroll knob.
Then press the ENTER button to enter the Input sub-menu.
2/ In the Input menu, select the type of input you have plugged into the Smart Vu LE by rotating the scroll
knob (see Input Specications). Then press the ENTER button to enter the types of inputs connected to the
Smart Vu LE.
3/ Press the EXIT/MENU button to return to the main menu.
4/ Repeat steps 1-3 for every source connected to your Smart Vu LE.
Once your inputs have all been congured, the output settings of the Smart Vu LE must be set according to
the machines plugged on your Smart Vu LE main output (video projector, preview monitor...).
* NOTE * : It is strongly recommended to set the output format of the Smart Vu LE to match the native
resolution of the display devices connected to the Smart Vu LE.
1/ In the Menu section, press the EXIT/MENU button and select Output in the menu by rotating the scroll
knob. Then press the ENTER button to enter the Output sub-menu.
2/ In the Output menu, select the output type, resolution and frequency, to match the viewing hardware
plugged into the Smart Vu LE, by rotating the scroll knob (see also Output Specications p.14). Then press
the ENTER button to enter each of the output parameters.
* NOTE * : be sure to press the ENTER button to conrm every selected setting, the Smart Vu LE, will revert
to its original settings if new choices are not conrmed.
3/ Press the EXIT/MENU button to return to the main menu.
Input selection settings
Source output selection
Output selection settings
27