User manual
Working with Presets
The four Eikos user presets can be called back
at any stage during your show or event.
1. Click one of the four available Preset buttons
to choose which memory you wish to use.
Select Load to Preview from the dropdown
menu, your preset will appear on the Preview
screen.
2. Once you have selected your preset, simply
click the Take button to view the result on your
main screen.
63
Working with Audio
The Eikos allows to work with up to 10 stereo inputs, 1 auxiliary input, and 2 embedded SDI audio
inputs (via the SDI BNC connectors), all accessible via the Audio menu of the Eikos, and which can
be affected to one or both of the 2 independent symetrical/asymetrical outputs of the device.
To congure audio settings of the Eikos, plug
all audio inputs into the device, and click on the
Audio tab of the RCS home page.
1. Set the Main audio output level and delay
(accessible only if Delay Mode is set to
Manual Adjust), or click the Mute button to
mute Main audio output.
2. Repeat step 2 for the Prelist audio output.
3. Individual source settings (level and balance)
for each audio input can be congured in the
right hand section of the Audio tab.
Audio conguration