User manual

61
Memorizing Frames in the Eikos
1. In the Input Selection section,
click on the source button
(1 to 12) of the source you wish to record as
a frame.
2. Click on the Logos/Frames tab of the RCS
interface. Then click on the Record Frame
button.
3. Click in the eld next to the rst free Frame to
select it.
4. Click on the Execute button.
Working with Logos
It is possible to store up to 8 logos in the Eikos non volatile memory. Logos work in much the same
way as frames, and can be recorded from any of the Eikos’ 12 sources.
Logos have more attributes than frames. They can be sized, positionned, but also keyed via color
cutout selection or luma key.
Memorizing Logos
1. In the Input Selection section, click the source
button (1 to 12) of the source you wish to
record as a logo.
2. In the Logos/Frames tab, click Record Logo,
then select an empty logo memory slot (1 to 8)
to record your logo into.
3. Adjust position, size and keying attributes for
your logo.
4. Click Execute to record your logo into the
selected memory slot. The Eikos RCS will display a progress bar while recording the logo.
5. In the Input Selection section, click the LOGO1 button, and select logo number (1 to 8) you wish
to use. Your logo will appear on the preview screen above any existing layer on screen.
6. Click the TAKE button. Your logo will appear on the main display.