User manual

60
Working with PIPs
The Eikos allows users to manipulate 2 PIPs (Picture In Picture) which you can move, size, crop or
zoom, apply transparency or transitions to.
PIP conguration
1. Click on the Image tab of the RCS interface. The empty Image
screen will appear on screen.
2. By clicking on the drop-down menu in the Preview section,
situated next to the layer you wish to use as a PIP, you will
access the image parameters of the PIP source you select
(1 to 12).
3. Set the desired PIP attributes (size, position, zoom, border,
transparency...).
4. Click the Image tab to return to the main screen.
Working with Frames
It is possible to store up to 8 frames in the Eikos non volatile
memory. Frames are mainly used as backgrounds in a typical
show or event setup, and can be recorded from any of the 8
Eikos sources and called back at the click of a single button.
* NOTE * : To memorize a frame, select an input, and take it
to the Main screen. Once the frame is displayed on your Main
output, it is then possible to store it to the Eikos non volatile
memory.
* NOTE * : Frames may be used only one at a time. A frame may not be used as a Live Background.