User manual

The quadravision mode allows displaying up to 4 live sources on a screen. The preview will display
just the edge of each PIP to know the position, size and the source attached.
Choose Quadravision mode in the Mode Menu then choose your rst template.
To use windows, rst attach your source to the windows wanted, you have to use the windows but-
ton in the quadravision eld.
Press W# button → Press input #
Press Take to apply the change on the main screen.
All windows have the same settings as PIPs on other modes. You can have access to them by the
Layer menu or directly by pressing the W# button once a source is attached. You always have ac-
cess to the shortcut transition button/black button:
Press W# button → Press the Cut/fade/user1/user2 button to set up the transition
Some templates are available for the Quadravision mode, you will nd them here:
Mode menu → Quadravision menu → template menu
Templates are just here to provide some useful layers positions, you can adjust them manually at
any time. Each template has to be saved in presets before doing change. If it’s not the case, all
template settings will be deleted.
Working with Templates
45
W 1
W 1
W 2
W 4
W 4
W 3
W 1
W 1
W 2
W 2
W 2
W 4
W 4
W 4
W 3
W 3
W 3
W 1
W 3
W 2
W 1
C- SETTINGS IN QUADRAVISION MODE
Template #1
Template #3
Template #4
Template #2