User manual

43
To use the Mirror mode, just perform your setting and operation from the Matrix output 1.
Nevertheless you can do manipulation on the output 2 at any time.
For a perfect use, set up the output format and rate for the output 2 like the output 1 using the syn-
chronise button: Output 2 → Synch w/Out 1
Working with Mirror Modes
The Mirror Matrix Mode is a specic matrix mode where the output 2 will be the perfect mirror copy
of the output 1. In that way, each settings apply to output1 will be performed on the output 2 too.
Mode Menu → Native Matrix mode menu → Mirror Mode
2- Clone mode: The output #1 and #2 will be the same. All change on the output #1 will be affected
to the output #2. Layers will have the same position and size.
For the ❶, ❷, ❸ & ❹ modes:
Red case: Mirror mode activated only for the PIP layer
Blue case: Mirror mode activated for PIP layer and Background live Layer
Using the Matrix mode, several conguration are available, the simple mode and the mirror mode.
Using the Mirror Mode:
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
Select the chosen layer and go in the layer menu then select the “Layer Copy Mode” menu.
There are several positioning:
To use the mirror mode, simply select the matrix mode by the main menu, then the mirror mode can
be activated layers by layers thanks to the layers menu.
1- No Copy: This mode is the standard matrix mode, output 1 and 2 are independent...
OUTPUT #1 OUTPUT #1OUTPUT #2 OUTPUT #2