User manual

For instance, if you want to put the Frame #1 on the Output 1 and the Live source number 3 on the output 2:

Press Matrix #1 button → Press Background Frame button → Press input#1

Press Matrix #2 button → Press background live button → Press input# 3

Press Take to view the result on both screens

Don’t forget to press the correct Matrix # button before pressing the Layer selection button, in order

to be sure doing the manipulation on the correct output.

Working with Cut, Fade or Transitions

Working with PIP

All the transitions (Cut, Fade or Transitions) are available in the native matrix mode. Although the

matrix mode is activated, you will be able to perform powerful transition effect seamlessly. It can

depend on your conguration.

The Eikos has 4 scalers, to understand how your effect will be performed, you need to know how

many scalers are used on your outputs. Don’t forget that you always need one free scaler to perform

clean transition. Example

1 background live on each output → 2 scalers used → 2 seamless transitions

1 background live on each output + 1 PIP on output 1 → 3 scalers used → 1 seamless tran-

sition available

1 background live on each output + 2 PIP on each outputs → 4 scalers used → no

seamless transition

The background Frame and the Logos are not considerate as active layers and are not counted as

using a scaler.

The PIPs are used in the same way than the mixer mode does. A source has to be selected to ac-

tivate the PIP settings. Each PIP has its own settings, PIP 1 on output 1 is not linked at PIP 1 on

output 2 in terms of settings.

All PIP settings are available in the Layer menu once the PIP is selected.

* NOTE *: Try to take a look at the blinking of the Matrix mode button to always knowing on which

output you are working on.