User manual

To congure audio settings of the Eikos, plug all audio inputs into the device, and navigate to the

Audio menu.

1. Choose the audio mode, Break Away or Top Layer Follow, which you wish the audio to work in.

* NOTE * : the Break Away mode will air the selected audio source, while the Top Layer Follow

mode will air audio from the toptmost active layer of the Eikos.

2. Select Source Settings from the Audio menu to select the audio source you wish to work with,

then set levels and left/right balance for each input.

3. Select Auxiliary Settings to determine level and balance of the auxiliary input.

4. In Mixer Mode, select the Main Output menu to determine main audio output level, balance and

delay settings, or to mute main audio output.

* NOTE * : in Matrix Mode, all output parameters can be assigned separately to outputs 1 and 2.

5. In Mixer Mode, select Audio Prelist, from the Audio menu, to determine pre-listen audio output

level, balance and delay settings, for each audio input, or to mute Prelist audio output.

* NOTE * : in Matrix Mode, select Out1 Prelist or Out2 Prelist from the Audio menu to set audio

pre-listen output parameters.

6. Select Delay Mode, to determine how the Eikos deals with audio delay. Select Auto Adjust

to let the Eikos determine audio output delay. Select Manual Adjust to determine audio delay

manually.

* NOTE * : selecting Manual Adjust will give access to audio delay value (in milliseconds) of the

main and Prelist audio output menus.

Audio conguration

Working with Audio

The Eikos allows to work with up to 10 stereo inputs, 1 auxiliary input, and 2 embedded SDI audio

inputs (via the SDI BNC connectors), all accessible via the Audio menu of the Eikos, and which can

be affected to one or both of the 2 independant symetrical/asymetrical outputs of the device.

Creating Presets

The Eikos allows the creation of user dened presets very easily. Any setup you have congured on

screen, can be stored into one of the 4 available user presets.

1. After having congured layers, PIP transitions, logos... on your screen (see Working with the

Eikos, p.29), go to the Preset menu by pressing the EXIT/MENU button, and select Preset by

rotating the scroll knob. Then, press the ENTER button to enter the Preset sub-menu. Choose

Preset Copy by scrolling with the corresponding knob, and press the ENTER button to access

the sub-menu.

2. In the sub-menu, choose Save From Main or Save From Preview to determine which screen you

want to memorize the preset from, then set the preset memory (1-4) you wish to use as your

“User Preset” (by default, the Eikos will choose the next available preset in the Eikos memory).

3. By pressing the ENTER button, the Eikos will ask you to conrm. Select Yes, your screen is

memorized as a preset.