User manual
Capturing Logos
Capturing an animated Logo
To capture a Logo, display the exact content you want to save on the main screen, you can use the
freeze button if you want. Then follow this step:
Logos/Frames menu → Record Logo menu → Set up your logo →Store menu → logo#
To set up your logo you have several features available:
- Position / Size Adjustment
- Keying type
- Luma / Chroma key
- Cut out color
Select the logo number you want to save and wait until the unit nish saving. Your logo is now saved
and you can use it through the background logo button.
You can save up to 8 logos with the Eikos.
To capture animated Logo, display the exact content you want to save on the main screen, you can
use the freeze button if you want. Then follow this step:
Logos/Frames menu → Record Anim menu → Set up your Anim →Store menu → logo#
To set up your anim you have several features available:
- Position / Size Adjustment
- Keying type
- Luma / Chroma key
- Recording time
- Cut out color
Select the anim logo #8 and wait until the unit nish saving. Your animation is now saved and you
can use it through the background logo button.
Only one Animated logo can be saved in the Eikos.
36
Mixer functions
In Multi Layer Mixer mode, the Eikos offers a variety of mixer type transitions, including wipes,
fades, and cuts. The transitions, transition times and fade/wipe effects can all be setup through the
Eikos Layer menu.
2. In the Layer Selection section, press the PIP1 button. The button will start blinking. On your
Preview screen, PIP1 will appear as a color rectangle. The parameters of the layer will
automaticaly appear on your Eikos VFD menu screen.
3. In the Layer menu, make the position, size, border and transparency settings you like, then
select Opening Effect in the layer options, press the ENTER button and select Type. Select Slide
Left - Right for example, and press the ENTER button to conrm. Navigate to Duration in the
Opening Effect sub-menu, and set the duration of your effect by rotating the SCROLL knob and
pressing ENTER.
Repeat the procedure in the Closing Effect sub-menu to determine the way your layer will close. Try
Slide From Left - Right for the closing type with a duration of 1.5 seconds for example.