User manual

Capturing still Frames
To capture a frame, display the exact content you want to save on one of your output, at the exact
resolution, you can use the freeze button if you want. Then follow this step:
(Choose rst the source to capture in the menu Logos/Frames -->capture sources)
Logos/Frames menu → record Frame menu→ frame #
Select the frame number you want to save and wait until the unit nish saving. Your frame is now
saved and you can use it through the background frame button.
Working with Frames
It is possible to store up to 8 frames in the Eikos non volatile memory. Frames are mainly used
as backgrounds in a typical show or event setup, and can be recorded from any of the Eikos’
12 sources and called back at the press of a single button. To use a frame, be sure rst that it is well
saved, then:
Press Background frame button → Press Frame # button
* NOTE * : Frames may be used only one at a time and cannot be placed in a layer.
Border:
The border has to be setting up in the Layer menu:
Press PIP# button → go in border menu → select and set your border with colour and size
Press Take to view the result on the main screen.
34
No border Color border
Shadow border
- Size and style of PIP border are
adjustable
- The background or PIP image
can be switched