User manual
31
Some other settings are available too:
- The Output synch polarity.
- The Gamma: use this feature to set up the output Gamma.
- Flicker Filter (video Out only): apply a icker lter on your video output.
- Analog type: set up the type of synchronisation of your Analog output.
- DVI type: set up the type of colour of your Digital output.
- HDCP detection: set up to enable/disable the HDCP detection on the output.
- Background colour: add a background colour in place of the default black one.
- Test pattern: use test pattern on main or preview screen to congure your projectors and/or
your softedge.
*All changes have to be validating by pressing the ENTER button in order to be saved*
* NOTE *: The output status can provide you all information about the output in real time.
This feature is particularly needed when HDCP is used with long cable to be sure that the
communication is well handled.
Video Out
The video Out allows you the same settings than other outputs with some additional specic options:
- Sharpness: set up the sharpness on the video out image.
- Flicker Filter: apply a icker lter on your video output to eliminate ickering.
In Matrix mode, the menu “connection mode” appears. It allows you to choose recording Output 1
or Output 2.
How to use the Mosaic Preview feature
To have a full vision of the aspects of your inputs two modes are available. When the Mosaic Preview
button is activated (Red light solid button):
- One live source mode: Select your Layer and the source you want to put on it. The input selected will
be automatically refreshed on your Mosaic Preview
Press a Layer button (Bkgnd Live, PIP1 or 2) --> Press the Live source chosen
- Random live source mode: To have a random refreshment of all your inputs, select a layer and put it to
black. All sources will be automatically refreshed randomly.
Press a Layer button (Bkgnd Live, PIP1 or 2) --> Press the Black Button