User guide

24
The [STANDBY] button allows users to put the STE100 into sleep
mode, and startup again. The [STANDBY] button does not replace the
ON/OFF switch at the rear of the unit, and is implemented essentially
for ease-of-use in rackmount situations.
--> Hold for 3 seconds for stand-by mode
The Menu Screen of the STE100 is the visual interface to your
STE100 menu. It gives users a constant indication of available
menu options, parameters of any selected object, system
information, and everything you need to know to control the device.
The Menu scroll knob allows users to quickly scroll through menu
items and increase or decrease any modiable value in the STE100
menu. Simply scroll to the desired menu item, and press the [ENTER]
button to conrm your choice.
The [EXIT/MENU] button and the [ENTER] button in the Control section
of the STE100, allow users to respectively enter and exit the STE100
menu, and conrm selected menu items.
The Input Selection section allows to select
which input to display in a selected layer.
Select one of 10 simultaneous inputs, (6
analog inputs, 2 DVI-D inputs, 2 SDI inputs)
by simply pressing one of the Input buttons.
On/Off button
Menu screen
Menu scroll knob
Control section
Input selection section
The [BLACK] button allows users to remove layer content on screen.