Owner's manual

61
8.2.25 Creang presets
2. In the sub-menu, choose Save From Program or Save From Preview to determine which screen you want
to memorize the preset from, then set the preset memory (#1 to #8) you wish to use as your “User Preset”
(by default, the Saphyr will choose the next available preset in the Saphyr memory).
By pressing the ENTER buon, the Saphyr will ask you to conrm. Select Yes, your screen is memorized as a
preset.

The 8 user presets of the Saphyr can be recalled at any stage during your show or event.
1. Press the PRESET buon, then press one of the eight rst preset buons to choose which memory (#1 to
#8) you wish to use. The preset will be displayed on your Preview screen.
2. Once you have selected your preset, simply press the TAKE buon to view the result on your main screen.

Into the audio menu, you will nd some audio adjustments:

- NO AUDIO: the audio of your device is switched o
- PRESET MODE: the standard mode of use of the device
You have two possibilies:
▪ the sound on the output will follow the audio input of the top layer.
▪ Breakaway: when breakaway is acvated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no eect on the
audio.
- ROUTING MODE: in this conguraon, simply choose an audio input to assign it to the output. The audio
conguraon remains the same during the show.
 into this menu you will have access to all source sengs:

 select to mute the input
select to choose between mono or stereo input
set up the analog gain of your analog input (0 for 4dBu)
 select to adjust the input audio level and right and le balance.

 choose the digital audio output mode
dene the main or prelist audio sengs:

 the sound on the output will follow the audio input of the top layer.
when breakaway is acvated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no eect on the
audio.
 select to mute your master audio
 select to choose between mono or stereo output
 set up the analog gain of your analog output (4dBu by default)
 set your master volume of the output
set the right/le balance of your output.