Owner's manual

60
8.2.21 Capturing an animated logo
NOTES:
• The cut out color is only a visual tool to help idenfy the transparent areas of the logo. These colored re-
gions will not be captured but later displayed as transparent area.
• Capturing a “logo” is limited to a small percentage of the output resoluon. To capture and display a full
screen image, use the sll “frame”.

To capture animated logo, display the exact content you want to save on the Program screen, you can use the
freeze buon. Then follow this step:

To set up your animaon, you have several features available:
- Posion / Size Adjustment
- Keying type
- Luma / Chroma key
- Recording me
- Cut out color
Select the animated logo #8 and wait unl the unit nishes saving. Your animaon is now saved and you can
use it through the background logo buon.


In the logos/frames menu, the logos can be deleted in the Erase menu:


A simple or animated logo can be manipulated through the front panel. On the front panel, the logo# are
associated to the input# respecvely. To assign a logo# to the logo layer:

Logos #1 to #8 are available directly by the input # buon on the front panel.
You can change logos or delete logos on the Preview screen using the same way the layers do:
- Clear: 
- Change:

Logos are under the layer rules, you will have direct access to sengs by pressing the logo layer buon. You
have 2 logos layers buons available.
You can use the Pos/Size/Zoom adjustment buon and the Eect buon from the front panel too.

The Saphyr allows the creaon of user dened presets very easily. Any setup you have congured on screen,
can be stored into one of the 8 available user presets.
1. Aer having congured layers, transions, logos... on your screen, go to the Preset menu by pressing the
EXIT/MENU buon, and select Preset by rotang the scroll knob. Then, press the ENTER buon to enter
the Preset sub-menu. Choose Preset Copy by scrolling with the corresponding knob, and press the ENTER
buon to access the sub-menu.