Owner's manual

58
8.2.15 Working with frames
Aempng to use a frame at a dierent resoluon will result in a paral frame display or a frame which does
not ll the screen.
During the capture, the output is outlined by a white border and includes the pixels into the white rectangle.

Frames are mainly used as backgrounds in a typical show or event setup, and can be recorded from any of
the Saphyr 10 sources and called back at the press of a single buon. To use a frame, be sure rst that it is
well saved, then:

NOTE: Frames may be used only one at a me and can be placed only in the frame layer.

When transioning sll layers, depending on how many scalers are in use, the Saphyr TAKE funcon will act
in one of 2 dierent ways when transioning the next preset (Preview) to the current preset (Program):
- TAKE
• All sll frames make an opening and closing phase.
• All sources of the same layer are completely dierent between the current preset and the next preset. The
opening and closing eects of the layer are set to Cut.
- TAKE
• One of the layer makes a change of source which is not in Cut.
• The opening and closing phases can be done with dierent eects.
• The sll frame appears and disappears of the layer with the following eects: Cut, Fade, Slide or Wipe.

In the frame input setup menu, you have the possibility to save a frame, and the possibility to erase a stored
frame:



The frame is considered as a layer and has some sengs available: Pos./Size, Transparency, Opening/Closing
eect, Smooth move and Status.
Those sengs have to be used as layer sengs. Press frame buon to have access to the layer menu sengs.
You can change frame or delete frame on the Preview screen using the same way the layers do:
- Delete: 
- Change: 
Press TAKE to view the result on the Program screen.

The Saphyr oers a wide variety of transions between the scenes you create for your shows and events. It
allows for live recall of 8 user presets, each of which you can edit at any given me.
1. Whether catering for complex event setups, or pung together intricate shows, your Saphyr will also deli-
ver some of what you could expect from a dedicated mixer, along with its switcher and scaler capabilies.