Owner's manual

31
7.2.3 Screens
Into the PREVIEW secon, you have the possibility to choose your PREVIEW mode:
Click on Mosaic to have a Mosaic Preview of all your inputs. Click on Preview to
simply have the standard Preview with all layer size and posion. Remember that
only 1 layer at the me can be display on the Preview.
PRESET ASPECT: disabling this opon disable the Preview indicaons on your Preview
monitor, such as the blinking layer wireframe, and source number.
OSD Fields: enable or disable all informaon about your layer conguraon
7.2.4 Preview
7.2.5 Misc
PRESET TOGGLE: by default, the device will not swap the Program and
Preview busses during each TAKE. Disabling this opon will leave the
Preview bus unchanged during each TAKE, and only the Program will be
updated. When this opon is enabled, the Preview and Program busses will
be swapped during each TAKE.
AUTOTAKE: enable the automac TAKE. Each me a source is changed on
preview, it triggers a TAKE to be launched.
DYNAMIC FIT: enable or disable the automac recognion of black band for
digital content. The size and the aspect rao of the layer are automacally
adapted.
FREEZE MODE: choose to freeze all inputs or only one input when you use the freeze funcon.
PIP BACKGROUND COLOR: here you chose the automac color of PIP background, black is the default color.