u User Manual

50
8.2.8 Working with layers funcons
 enable/disable smooth move,
- Status: get the selected layer status.
All changes have to be validated by pressing the ENTER buon in order to be saved
Press TAKE

  
Posion YES YES
Size YES YES
Zoom YES YES
Transparency YES YES
Opening eects YES YES
Closing eects YES YES
Smooth Move YES YES
The Program output can displayed simultaneously up to 3 layers stacked
from boom to top as follows:
- Layer A: one source selected from 8 inputs available,
- Layer B: one source selected from 8 inputs available (keying acvated),
 one of the 8 frames available.

When transioning live layers, depending on how many scalers are in use, the QuickVu TAKE funcon will
act in one of 3 dierent ways when transioning the next preset (Preview) to the current preset (Program):
• TAKE
- There are enough scalers for making a transion
- All inputs are locked on to scalers
- There are no contraints for closing before the TAKE
- All opening and closing transions can be performed simultaneously.
• TAKE
- There are enough scalers for making a transion
- All inputs are locked on to scalers before the TAKE
- There are no constraints for closing during the TAKE
- All the necessary closing transions are performed to free occupied scalers and then the QuickVu performs
all openings.
• TAKE
- There are not enough scalers for making a transion
- All inputs are not locked on to scalers
- All the necessary closing transions are performed to free occupied scalers. The QuickVu locks on to new
sources and performs all openings.
2 layers