X Instruction Manual

8.2.15 Working with Mirror modes

 the mirror mode can be acvated layer by layer thanks to the layers menu. Select the

chosen layer and go in the layer menu, then select the “Layer Copy Mode” menu. There are several mirror

posioning opons:

this mode is the standard Matrix mode, output #1 and #2 are independent.

 Outputs #1 and #2 will be the same. All changes on output #1 will be aected to output #2.

Layers will have the same posion and size.

OUTPUT #1 OUTPUT #2

OUTPUT #1

OUTPUT #1OUTPUT #2 OUTPUT #2

 Output #2 will be exactly the same as output #1 except the fact that the selected

layer will have its H posion ipped (standard Mirror mode).

OUTPUT #1

OUTPUT #2

NOTES:

• Remember to simplify the use of this feature, you need to manipulate Output #1. While in mirror mode,

Output #2 will follow.

• Every change on Output #2 will have an eect only on Output #2, but remember that if a change occurs on

Output #1 aer that, Output #2 will update automacally to match output 1.