X Instruction Manual

8.2.6 Working with layers funcons



  PIP#2

Posion YES YES

Size YES YES

Zoom YES YES

Opening eects YES YES

Closing eects YES YES

Smooth Move YES YES

The Program output can displayed simultaneously up to 3 layers stacked from boom to top as follows:

- Layer A: one source selected from 8 inputs available,

 one of the 8 frames available.



• To have access to the layer adjustment menu, a source has to be aected to your layer:



• Once a source is aached to layer, you can have access to the layer adjustment menu:



Press TAKE



All the transions (Cut, Fade or Transions) are available in the nave Matrix mode. You will be able to per-

form powerful transion eects seamlessly. It can depend on your conguraon.

The QuickMatriX has 4 scalers, to understand how your eect will be performed, you need to know how

many scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless

transions.

Example:







All the sengs are available in the Layer menu aer pressing the selected layer.

To use it: 

The eect will be immediately aached to the selected layer (Preview).

- CUT: duraon me can be set to delay the cut eect,

- FADE:

• Adjustable pre-med fades or manual transion

with T-Bar,

• Fade between any input, computer or video,

• Adjustable cross-fading duraon,



Program

Preview

Program

Preview