X Instruction Manual
34
7.2.7 Frame management
Set it manually looking at the color change into Current color. If you want, you can quickly select a color from
a color panel, clicking on CURRENT COLOR. Then click on the color itself to obtain the color panel. Once
your main color is chosen, you can dene a degree of tolerance around this color. The tolerance will dene,
around the main color, an area that will be keyed too. You may sll need to make further adjustments to the
luminance level to complete your key eect.
- Grabber: acvate the grabber to grab the color you want to key. Move the cursor and click on the grab
buon to grab the color.
To save a frame click on this buon:
The next page opens.
From here you can capture from the main or from the Preview.
You can sll freeze the output before saving your frame.
Choose rst Program or Preview, click on FREEZE if you want to freeze your output. Then click on EXECUTE to
save your frame into the selected slot.