Owner's manual

3-3. DISPLAY DEVICE ADJUSTMENTS
• IN SEAMLESS MODE :
1) Select the reference computer source. The reference computer image is displayed onto the output.
2) Adjustdirectlythedisplaydeviceitself,usingitspositionandsizecontrols,tollthecomputerimagein
full screen.
• IN FAST SWITCHING MODE :
1) DisplaythecenteringpatternwiththeLCDmenu(OUTPUT>testpattern>centering).
2) Display a black output.
3) Adjustdirectlythedisplaydeviceitself,usingitspositionandsizecontrols,tollthecenteringpatternin
full screen.
❶
❷
3-4. IMAGE ADJUSTMENTS
3-4. AUDIO ADJUSTMENTS
For each input source connected to the device, make the following adjustments :
NOTE : In seamless mode the reference computer input can not be adjusted.
1) Selectthesourceyouwanttoadjust(withthefrontpanel“INPUTSELECTION”buttons).
2) SelecttheaspectratioofyourinputsourcewiththeLCDmenu(IMAGE>aspectratio).
3) UsetheCenteringfunction(IMAGE>centering)toautomaticallypositiontheimageintheCentering
pattern.
IMPORTANT : For best results, display a full size bright image (no black border) to perform a centering. If
necessary, correct the adjustment with the position & size functions (IMAGE > pos settings).
NOTE : The centering function is only available for computer sources.
NOTE : In case of same Input/Output resolution, the centering also achieves automatic pixel clock ad-
justments. It may be useful, to improve manually the pixel clock and phase using the LCD menu
(IMAGE > optimize > clock or phase).
4) As required, make the other adjustments, available in the LCD IMAGE menu (color, brightness…).
NOTE : To set the image adjustments to the factory settings, use the Preset function (IMAGE > preset > yes).
NOTE : The adjustments are automatically stored in NON-volatile memories. The device comes with 40
NON-volatile image memories. Each of these memories contains the input channel number, the
input and output format parameters and all of the image adjustments (position, size, brightness...).
When the 40 memories are used, each new memorization erases the oldest record.
1) Adjustthemastervolume(AUDIO>mastervolume).
2) Settheautofolloworbreakawayaudiomode(AUDIO>audiosource>autofolloworinput#x):
- auto follow = the audio switching follows automatically the video switching.
- breakaway = the selected audio input is permanently diffused.
3) Foreachaudioinput,adjustthelevel(AUDIO>audiolevel)andthebalance(AUDIO>audiobalance).
4) Adjustyourmicrophone(AUDIO>mic-control).
PAGE20