Instruction Manual

Setting up the Quattro Value
WORKING WITH THE QUATTRO VALUE
The following setup is an example of a typical Quattro Value conguration for an event or roadshow, but can of course
be modied according to your specic needs:
Turn OFF all of your equipment before connecting.
- Selection of the four
input sources: #1 to #4.
- Selection of the
four frames: F1 to F4
(see NOTE).
Allows to display the
pre-selected source
onto the Main output
with the selected effect.
Secondary function
selection button.
TakeFn
Input selection
CAMERA COMPUTERNOTEBOOK VCR / DVD PLAYER
INPUT SOURCES
MAIN DISPLAY
PREVIEW DISPLAY
MAIN PROJECTOR
RS-232 communication port
on a DB9 female connector or
TCP/IP on RJ45 connector
❶
❷
❸
❹
❸
❷
❹
Selection of the four
EFFECT PRESET.
Effect preset # 3 &
#4 can be used by
rst pressing Fn.
Effect
Freeze the main out-
put (the blinking LED
indicates the Freeze is
active).
LOGO display can be
used by rst pressing
Fn.
Freeze/logo
!