User Manual

Please check the User manual and our website for further informaon: 
Version: 4.00 - 04/24/2014
Code: 140104
All Analog Way products have a 3 year warranty on parts and labor, return to factory, but do not include faults resulng
from user negligence, any unauthorized modicaons, electrical surges, mishandling (drop/crush), and/or any other
damage caused by misuse.
The included carrying case and protecve foam is not covered under warranty.

Backgrounds, frames, PIPs, and logos are all considered layers.
To work with a layer, press the BACKGROUND LIVE, BACKGROUND FRAME, ADD PIP or ADD LOGO buon.
In the Source Preview secon, select the source you wish to assign to that layer. It will appear on the Preview output
of your slave device. Press TAKE to go live on your Main output.
Selected objects can be moved or resized with the help of the joysck.
Any selected object can be cleared by pressing the CLEAR buon twice (to clear mulple layers, press CLEAR PIPS,
CLEAR LOGOS or CLEAR ALL, twice).
Source parameters of the selected layer can be accessed via the opons on the last line of the tacle screen or via the
5
th
knob.

The TAKE buon will bring everything you have congured, from your Preview output to your Main output.
The Orchestra² T-Bar makes the same transion, but you can manually control the progress of the eect.
The TAKE CUT buon allows you to override all transion eects with a cut eect.
Finally, the STEPBACK buon will help you to revert your main output to its previous screen state. Press the STEPBACK
buon and press TAKE to do this.

Each me you congure a screen (background, PIPs, logos), you can save it to a Preset Memory for future use, then call
it back at any me.
To do this, congure a screen with all the desired elements, and press the SAVE TO MEMORY buon.
In the Preset Memory secon, choose the memory slot you wish to save to by pressing a buon (#1 to #8).
To recall that memory and use it, press the LOAD FROM PRESET buon, press a Preset Memory buon and press TAKE.
 Pressing the PAGE buon while selecng a Preset Memory (#1 to #8), will select a memory page, each containing 8
memory slots (64 in total).

Dene your Show while you have no hardware device connected to the ORC50. You can congure screens and dene
presets in advance and recall them later.

DVX8044
EKS500 EKS400
OPS300 OPS200
SMX200 SMX100
PLS300 PLS200
SVU300 SVU200
STE200
STE100
SQD200
EKS550
SPX450
SMX250
PLS350
QMX150
QVU150

x x x x x x x x x x x x x

x x x x x x x x x x x

x x x

x x x
The Orchestra² can control the following Seamless Switchers:
FRONT PANEL DESCRIPTION
MANAGING WITH THE ORCHESTRA²
WARRANTY
GOING FURTHER WITH THE ORCHESTRA²