Owner's manual

36
5.8 Transions
5.8.4 Step back
The STEP BACK buon in the Orchestra² Transion secon, allows you
to literally go back one step. If you have made a mistake in your Main
output setup, and wish to revert to the previous state, press the STEP
BACK buon, then press the TAKE buon, the Orchestra² will revert
to the previous step.
NOTE:
• You can use the STEP BACK buon as a way to toggle between two presets. Simply press the STEP BACK
buon and then the TAKE buon as many mes as you like, thus switching back and forth between two
presets.
• Press and hold the STEP BACK buon to acvate the Preset Toggle funcon.
5.8.5 Take Cut
The TAKE CUT buon has exactly the same funcon as the TAKE buon, other than it overrides all transions
between presets with a cut eect. For example, a PIP with a slide in from le eect, will simply appear
onscreen in its nal posion, without execung the eect.
5.8.6 Init-T-bar
The Init-T-Bar buon will help the unit to reduce theT-Bar delay warning the device that the user wants to
take smoothly.
First, press the Init-T-Bar buon then use theT-Bar in order to have a smooth transion.
5.8.7 Quick Frame
The QUICK FRAME buon of the Orchestra², allows the instant display of a stored emergency frame above
all layers.
Visit the Controls page (Screen Setup) for conguring the Quick Frame for the current screen.
NOTE: This funcon requires Eikos², Saphyr, SmartMatriX², Pulse², QuickMatriX and QuickVu.
3 funcons associated with TAKE
and T-BAR:
- STEP BACK - short press acvates
the Step Back funcon
- STEP BACK - long press to enable/
disable the PRESET TOGGLE
funcon.
- INIT T-BAR
- TAKE CUT