Owner's manual
34
5.7 Preset memories
5.7.5 Improved Mulscreen Control
STATUS MENUS
New READY status menu: the new menu in the upper right hand corner of the screen shows you the current
connecvity status of each of the 6 screens.
READY is Dark Grey = no device congured on this screen.
READY is light Grey = screen not currently connected.
READY is Green = screen is connected and ready.
New TAKE status menu: the new menu in the upper right hand corner of the screen shows you the current
TAKE status of each of the 6 screens.
TAKE is Dark Grey = no device congured on this screen.
TAKE is light Grey = screen not currently connected.
TAKE is Red = Preview is dierent than Main, and TAKE will make a change on this screen.
Screen Selecon Filter: The improved Mulscreen funcons on the Orchestra² give you more control over
which screens will be aected with the next TAKE or Preset Save/Recall operaon. Each screen’s parcipaon
in the next operaon can be toggled on or o by pressing the desired screen buon. To toggle o a screen,
rst select it, and then press the screen buon again. You can conrm whether a screen will be changed in
the next operaon by looking at the TAKE status menu, or at the color of the screen buons.
- When the screen buon is Red, this screen is part of the current selecon, and the Preview has been
modied from the Main.
- When the screen buon is Yellow, this screen is part of the current selecon, and the Preview is idencal to
the Main.
- When the screen buon is Green, this screen is not part of the current selecon, (or there is no device
congured on this screen).
TIP:
• To quickly select only one screen for the next operaon, without aecng the contents of any screens, press
and hold a single screen buon.
• The screen which is currently open for eding and displayed on the touchscreen will have a blinking screen
buon.
PRESETS
Presets can now be saved to aect any number of screens independently. For example, in a 3 screen show,
it is now possible to save a preset which, when recalled, will only aect screens 1 and 3. It is also possible
to recall a preset which was saved to aect many or all screens, and then use the screen selecon lter
described above to take on a smaller subset of screens.
Each preset that is saved will only store the screens which are currently selected, as described above. When
this preset is recalled with a standard keypress, only the stored screens will be loaded, and the current screen
selecon lter will be adjusted to include only screens that are part of the preset. You can then modify the
current selecon to include more or less screens, and then press TAKE.
By updang the screen selecon lter with each preset recall, you can create presets which aect only one
screen, and when recalled, do not change anything you have already done on the other screens. This allows
you to quickly and eciently recall and TAKE a preset which aects any number of screens.
TIP: To recall a preset on only the currently selected screens (instead of the stored selecon lter), you can
press and hold the desired preset memory.