Owner's manual

32
5.6 Working with logos
To add a logo to your Screen, proceed as follows:
1. Press the ADD LOGO buon to acvate the Logo outline
rectangle on screen. The touch screen of the Orchestr will
display a yellow rectangle, indicang the logo posion.
2. The blue Source Preview secon light will blink to indicate
you can select the source you want to use as a logo. Press a
Source Preview buon (#1 to #8). The chosen logo should now
appear on your Preview output in the Logo rectangle, and on
the touch screen of the Orchestr in the shape of a yellow
rectangle above any Frame or live element.
3. Press the TAKE buon to view the result on your Main output.
4. To add another logo, follow steps #1 to #3 again.
5.6.2 Selecng a Logo
To select the LOGO you wish to work with, press several mes on the SELECT LOGO buon, or press on the
LOGO on the touch screen of the Orchestra².
5.6.3 Manipulang a Logo
Logos on your Screen can be posioned anywhere (keying aributes are available only during capture, see
also Logos & Frames).
To posion a logo:
1. Select the logo you wish to move.
2. In the Layout secon, press the POS buon, and move the logo with the help of the joysck (see also Using
The Joysck).
3. When you have reached the desired posion, press the TAKE buon to view the result on the Main output.
5.6.4 Logo depth
The Logo depth allows users to move Logos up or down through the successive layer hierarchy. In other
words, you can change the order of a Logo from beneath another Logo to above it, or vice-versa.
1. Select the Logo you want to move up or down.
2. In the Preset Edion Secon, press the LOWER buon to move the Logo down, press the RAISE buon to
move the Logo up
5.6.5 Clearing a Logo
To clear a Logo from your Screen, proceed as follows:
1. Select the LOGO you wish to clear.
2. Press the CLEAR buon once. In the Orchestr Sengs secon, the touch screen will ask to conrm in
the form of a message on a yellow banner at the boom of the screen. Press the CLEAR buon again to
conrm. The LOGO will disappear from the Preview output.
3. Press the TAKE buon to view the result on your Main output.
NOTE: To clear all logos present on screen, in step #2, press the CLEAR LOGOs buon rather than the CLEAR
buon.
5.6.1 Adding a logo
5.6 Working with logos