Owner's manual

30
To add a PIP (Picture In Picture) to your Screen, proceed as follows:
1. Press the ADD PIP buon to acvate the PIP outline rectangle
on screen. The tacle screen of the Orchestra² will display a
yellow rectangle, indicang the PIP posion and size.
2. The blue Source Preview secon light will blink to indicate you
can select the source you want to use as a PIP. Press a SOURCE
PREVIEW buon (#1 to #8). The chosen image should now
appear on your Preview output in the PIP rectangle, and on
the tacle screen of the Orchestr in the shape of a yellow
rectangle above any Frame or Live Background.
3. Press the TAKE buon to view the result on your Main output.
4. To add another PIP, follow steps #1 to #3 again.
To select the PIP you wish to work with, press several mes on the SELECT PIP buon unl the required PIP
is displayed in yellow or press on the PIP on the tacle screen of the Orchestra².
To clear a Frame from your Screen, proceed as follows:
1. Press the BKGND FRAME buon to select the Background
Frame you wish to clear from your Screen.
2. Press the CLEAR buon once. In the Orchestra² Sengs
secon, the touch screen will ask to conrm in the form of
a message on a yellow banner at the boom of the screen.
Press the CLEAR buon again to conrm. The Background
Frame will go to black on the Preview output.
3. Select a new source for your empty Frame Background by
pressing a SOURCE PREVIEW buon (#1 to #8), or simply
press the TAKE buon to view the result on your Main output.
NOTE: It is not necessary to clear a Background Frame to switch its source.
5.4 Frame backgrounds
Preset Edion: Save, load and modify presets. Various
layer properes are also available in this secon.
CLEAR ALL buon: delete all layers.
Please refer to our user manual for all the funcons
in this secon.
5.4.2 Clearing a Frame
5.5.1 Adding a PIP
5.5.2 Selecng a PIP
5.5 Working with PIPs