Manual

On/Off button
The [STANDBY] button allows users to put the OPS300 into sleep
mode, and startup again. The [STANDBY] button does not replace
the ON/OFF switch at the rear of the unit, and is implemented
essentially for ease-of-use in rackmount situations.
--
>
Hold for 3 seconds for stand-by mode
Menu screen
The Menu Screen of the OPS300 is the visual interface to your
OPS300 menu. It gives users a constant indication of available menu
options, parameters of any selected object, system information, and
everything you need to know to control the device.
Menu scroll knob
The Menu scroll knob allows users to quickly scroll through menu
items and increase or decrease any modiable value in the OPS300
menu. Simply scroll to the desired menu item, and press the [ENTER]
button to conrm your choice.
Control section
The [EXIT/MENU] and the [ENTER] button in the Control section of
the OPS300, allow users to respectively enter and exit the OPS300
menu, and conrm selected menu items.
26
Layer selection section
The Layer Selection section allows to select which type of layer to
work with:
• Background Frame (non-positionable, non-resizable static back-
ground),
• Background Live (positionable, resizable animated background),
• PIP (positionable, sizable oating window),
• Logo (positionable, key sensitive layer).
Take button
The OPS300 [TAKE] button allows to switch from Preview to Main
outputs. By pressing the [TAKE] button, what you have setup on your
preview screen will be transitioned to the Main output display.