Manual

5► [LOGOS/FRAME] + ENTER
5-1 [Use logo] + ENTER.
 Selectanitemwith◄►+ENTER.
5-1-1 [Display] + ENTER.
 ThisfunctionallowsturningtheassignedlogosofeachinputONorOFF.Selectaninputwith◄►andpress
ENTER to select ON or OFF.
NOTE : To display a logo the output format should be the same as the one used during the storing.
5-1-2 [Assignment] + ENTER.
This function allows assigning the stored logos to an input device (up to 2 logos simultaneously).
①Selectaninputwith◄►+ENTER.
②SelectINDEX1orINDEX2with◄►+ENTER.
③Thenselectalogoornonewith◄►+ENTER.
5-1-3 [Position] + ENTER.
Adjust the logo position with H & V position functions.
5-1-4 [Transparency] + ENTER.
This function allows adjusting the logo transparency.
5-1-5 [Fade duration] + ENTER.
This function allows adjusting the fade duration of the logo when you turn ON or OFF a logo. Adjust the duration
with◄►andvalidatewithENTER.
5-2 [Record logo] + ENTER.
This mode allows storing up to 8 logos in order to key them on the displayed image (up to 2 logos simulta-
neously).Selectanitemwith◄►+ENTER.
5-2-1 [H position] + ENTER.
 AdjusttheHorizontalpositionofthelogoareawith◄►+ENTER.
5-2-2 [V position] + ENTER.
 AdjusttheVerticalpositionofthelogoareawith◄►+ENTER.
5-2-3 [H size] + ENTER.
 AdjusttheHorizontalsizeofthelogoareawith◄►+ENTER.
5-2-4 [V size] + ENTER.
 AdjusttheVerticalsizeofthelogoareawith◄►+ENTER.
NOTE : The logo area is limited to one eighth (1/8) of the displayed area.
5-2-5 [Luma key level] + ENTER.
 Thisfunctionallows“erasing”thedarkestportionofyourlogoareainordertomakespeciallogocontour.
 Adjustthelumakeylevelwith◄►+ENTER.
5-2-6 [Back. Color] + ENTER.
 Thisfunctionallowscoloringthe“erasedportions”ofthelogowhenusingthelumakey.Selectalevelwith◄►
+ ENTER.
5-2-7 [Store] + ENTER.
 Thisfunctionallowsstoringthelogointooneofthe8memories.Selectalogomemorywith◄►+ENTER.The
memorization will take few seconds.
5-3 [Record anim] + ENTER.
This mode allows storing an animated logo in order to key them into the displayed image. Select an item with
◄►+ENTER.
5-3-1 [H position] + ENTER.
 AdjusttheHorizontalpositionofthelogoareawith◄►+ENTER.
5-3-2 [V position] + ENTER.
 AdjusttheVerticalpositionofthelogoareawith◄►+ENTER.
5-3-3 [H size] + ENTER.
 AdjusttheHorizontalsizeofthelogoareawith◄►+ENTER.
5-3-4 [V size] + ENTER.
 AdjusttheVerticalsizeofthelogoareawith◄►+ENTER.
NOTE : The logo area is limited to one eighth (1/8) of the displayed area.
PAGE 31