Manual

4►[IMAGE] + ENTER.
► If the selected input type is a VIDEO signal the IMAGE MENU displays the following items :
4-1 [Pos. settings] + ENTER.
 Selectoneofthefollowingfunctionswith◄►+ENTER.
4-1-1 [H position] + ENTER.
 AdjusttheHorizontalpositionwith◄►+ENTER.
4-1-2 [V position] + ENTER.
 AdjusttheVerticalpositionwith◄►+ENTER.
4-1-3 [H size] + ENTER.
 AdjusttheHorizontalsizewith◄►+ENTER.
4-1-4 [V size] + ENTER.
 AdjusttheVerticalsizewith◄►+ENTER.
4-2 [Aspect in] + ENTER.
 SelecttheAspectRatioofyourinputsourcewith◄►+ENTER.
• [4/3 standard] : 4/3 input format.
• [16/9 letterbox] : Letterbox input format.
• [WS anamorphic]:WidescreenAnamorphicinputformat(video)or16/9inputformat(computer).
4-3 [Aspect out] + ENTER.
 Selectoneofthefollowingoutputaspectratiowith◄►+ENTER.
• [Standard] : The entire image and the aspect ratio are preserved.
• [Crop]: Theimageiszoomedwithoutdeformationtollthescreen,butsomebordersoftheimagewill
be cropped. The aspect ratio is preserved.
• [Full Screen]:Theimageisstretchedtollthescreen.Theaspectratioisnotpreserved.
• [Zoom] : The image can be zoomed, cropped and stretched at your convenience.
4-4 [Brightness] + ENTER.
 AdjusttheBrightnesswith◄►+ENTER.
4-5 [Contrast] + ENTER.
 AdjusttheContrastwith◄►+ENTER.
4-6 [Color] + ENTER.
 AdjusttheColorwith◄►+ENTER.
4-7 [Hue] + ENTER.
 AdjusttheTintofthepicture(NTSConly)with◄►+ENTER.
4-8 [U/overscan] + ENTER.
 SelectUnderscanorOverscanwith◄►+ENTER.
• [underscan] : Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan] : Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
4-9 [Preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
PAGE29