Manual

4-2. USING THE FRAME
This function allows memorizing up to 4 frames (images) in order to display them at any time during the show.
IMPORTANT : The output format used when displaying the frame should be the same as the one used during
the FRAME storing.
• HOW TO STORE A FRAME :
1) Select the source to be stored as a frame (with the INPUT SELECTION buttons).
2) Select the record frame mode (LOGOS/FRAME > record frame) : the device displays a white rec-
tangle corresponding to the frame selection area onto the output. If necessary adjust the position and
size of the frame selection area (IMAGE > pos settings).
3) Store the frame (LOGOS/FRAME > record frame > store). The memorization starts and will take about
2 minutes.
NOTE : For motion picture, use the FREEZE function, before doing the memorization.
• HOW TO DISPLAY the FRAME ON or OFF :
4) To turn the FRAME ON, select a Frame selection button on the front panel (Fn then F1, F2, F3 or F4)
then press TAKE.
5) To turn the FRAME OFF, select an input selection button, then press TAKE.
PAGE 22