Owner's manual

Analog Way Worldwide
Europe, Middle East & Africa: +33 (0)1 81 89 08 60
The Americas: +1 212 269 1902
Asia Pacific: +65 6292 5800
www.analogway.com
Front and back rack mount for
the LiveCore-based systems
Two rack kits are supplied with the device:
• Front ears (Ref: 180469)
• Rear rack mount rail (Ref: 180489)
(Compable with the following devices: NeXtage 16,
SmartMatriX Ultra, Ascender 32, Ascender 48)
SCREWS SUPPLIED
16 x M4x10
CAUTION!
Mounng using only the front rack ears is sucient for xed installaons. Addional
support, such as the rear rack support or slide rails, is required for mobile applicaons,
and recommended for all.
To install the front ears:
Simply screw ears on each side of the device using 2 screws M4x10 (included), then place your unit into the
rack and screw the ears on the rack (screws not provided).

Summary of content (2 pages)