User Manual


11.1 Auto Calibraon

The  includes an automac calibraon system. This system will calibrate all analog outputs/inputs
thanks to internal test paern. To be sure the calibraon will do in the right way, please unplug all video
input/output cable. The unit is able to perform itself the calibraon without any other devices plugged.
Go into the  menu, and then auto calibrate.
Choose Input or Output calibraon and
click and  buon to launch the
process.
 Don’t press START if you are
running a show, live modicaons can
appear on your screen.
Don’t press START if you don’t need any
calibraon.
The , thanks to the Ethernet connecon, can be control by an external user using the remote
maintenance system. This remote maintenance is based on an Ethernet access thanks to the RJ45 cable.
To be able to control the unit from another place, your unit as to be connected to the web, please check into
the Dashboard if all alarms are , parcularly the ETHERNET alarm, and the WEB alarm.
To acvate the remote maintenance or to receive more informaon about this service, please contact your
local technical support.
 
 