User Manual
4.5.5 Output computer formats
The outputs support GTF (version 1.1), CVT (version 1.1) and DMT (version 1.0 rev 12) standards.
Other non-standard formats are supported via the custom format capability of the framework.
The oers a list of pre-dened output formats. The list of output formats is always displayed from
increasing number of pixels per line and then number of lines.
The oers two input modules. Each input module contains 4 inputs.
Each input is composed of several plugs. A plug corresponds to a socket on the rear panel.
The following types of plugs are available on the rear panel:
- 4-Lanes DisplayPort in version 1.1a (can accept a Dual-Link DVI input via a non-supplied acve adaptor)
- HDMI
- Single DVI-I / Dual-Link DVI-D (DVI-I connector),
- 3G/HD/SD-SDI (BNC),
- Universal Analog (HD-15)
VGA 640x480 4/3 Yes Yes
WVGA 848x480 16/9 Yes Yes
SVGA 800x600 4/3 Yes Yes
720p 1280x720 16/9 Yes Yes
XGA 1024x768 4/3 Yes Yes
WXGA 1280x768 5/3 Yes Yes
SWXGA 1360x768 16/9 Yes Yes
1366x768 1366x768 16/9 Yes Yes
WXGA2 1280x800 16/9 Yes Yes
SWXGAP 1366x800 5/3 Yes Yes
900p 1440x900 16/10 Yes Yes
SXGA 1280x1024 5/4 Yes Yes
SXGAP 1400x1050 5/3 Yes Yes
UXGA 1600x1200 4/3 Yes Yes
WSXGAP 1680x1050 16/9 Yes Yes
1080p 1920x1080 16/9 Yes Yes
WUXGA 1920x1200 16/9 Yes Yes
2K 2048x1080 17/9 Yes Yes
QXGA* 2048x1536 4/3 Yes Yes
WQHD* 2560x1440 16/9 Yes Yes
*Dual-Link format
WQXGA* 2560x1600 16/10 Yes Yes
1152x864 4/3 Yes Yes
1280x960 4/3 Yes Yes
2048x1152 16/9 Yes Yes
1600x900 16/9 Yes Yes
1440x960 3/2 Yes Yes
1360x1020 4/3 Yes Yes