Instruction Manual
67
8.3.8 Working with presets in Matrix mode
The Eikos² has 4 scalers, to understand how your eect will be performed, you need to know how many
scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless
transions.
Example:
The frame and the logos are not considered as live layers and are not counted as using a scaler.
In Matrix mode, you will nd a new menu into Preset menu called “Preset management”. This will help you
to dene what kind of preset you want to save:
preset saved for both outputs,
preset saved only for the current output,
preset saved only for output #1,
preset saved only for output #2.
The Mirror Matrix mode is a specic Matrix mode where the output #2 will be the perfect mirror copy of the
output #1. In that way, each sengs apply to output #1 will be performed on the output #2 too.
Using the Matrix mode, several conguraons are available, the simple mode and the mirror mode.
1. No Copy: this mode is the standard Matrix mode, output #1 and #2 are independent.
2. Clone mode: Outputs #1 and #2 will be the same. All changes on output #1 will be aected to output #2.
Layers will have the same posion and size.
OUTPUT #1 OUTPUT #2
OUTPUT #1
OUTPUT #1OUTPUT #2 OUTPUT #2
to use the mirror mode, simply select the Matrix mode throught the main menu,
then the mirror mode can be acvated layer by layer thanks to the layers menu. Select the chosen layer and
go in the layer menu, then select the “Layer Copy Mode” menu. There are several mirror posioning opons: