Instruction Manual

8.3.6 Working with nave Matrix mode

NOTE: The output status can provide you all informaon about the output in real me. This feature is par-

cularly needed when HDCP is used thanks to the HDCP status.

All changes have to be validated by pressing the Ok buon in order to be saved

Video Out

In nave Matrix mode, the menu “connecon mode” allows you to choose recording Output #1 or Output #2.

In Matrix mode, the SDI output embeds audio from Output #1 and Output #2.



To acvate the nave Matrix mode:



You’ll nd all menus from the Mixer mode in the main menu except some specic matrix funcon added.

To work with nave Matrix mode, you have to use the Matrix # buons rst.

For instance, if you want to put the fame #1 on the Output #1 and the live source #3 on the output #2:





Press TAKE to view the result on both screens

Don’t forget to press the correct Matrix # buon before pressing the Layer selecon buon, in order to be

sure doing the manipulaon on the correct output.



All the transions (Cut, Fade or Transions) are available in the nave Matrix mode. Although the Matrix

mode is acvated, you will be able to perform powerful transion eects seamlessly. It can depend on your

conguraon.

Display mode 

Availability

Output #1

Output #1 & #2 side by side

YES

Matrix mode only

OUT #1

Output #2

Output #1 & #2 Top and Boom

OUT #2











