Instruction Manual

8.2.21 Capturing an animated logo

Logo capture is limited in the number of pixels being captured. When the logo capture area is resized, exten-

ding the horizontal size may reduce the vercal size to compensate.

Logos can also be captured and displayed with transparent areas. By adjusng the keyer in the logo capture

menu, the porons of the captured area can be keyed away and captured as transparent.

The logo “Cut out color” can help display which porons of the image will be captured as tranparent.

NOTES:

• The cut out color is only a visual tool to help idenfy the transparent areas of the logo. These colored re-

gions will not be captured but later displayed as transparent area.

• Capturing a “logo” is limited to a small percentage of the output resoluon. To capture and display a full

screen image, use the sll “frame”.

8.2.21 Capturing an animated logo

To capture animated logo, display the exact content you want to save on the Program screen, you can use the

freeze buon. Then follow this step:

Logos/Frames menu > Record Anim menu > Set up your Anim > Store menu > logo#

To set up your animaon, you have several features available:

- Posion / Size Adjustment

- Keying type

- Luma / Chroma key

- Recording me

- Cut out color

Select the animated logo #8 and wait unl the unit nishes saving. Your animaon is now saved and you can

use it through the background logo buon.



8.2.22 Logos input setup menu

In the logos/frames menu, the logos can be deleted in the Erase menu:

Logos/Frames menu > Erase menu > Select Logo#



A simple or animated logo can be manipulated through the front panel. On the front panel, the logo# are

associated to the input# respecvely. To assign a logo# to the logo layer:



Logos #1 to #8 are available directly by the input # buon on the front panel.

You can change logos or delete logos on the Preview screen using the same way the layers do:

- Clear: 



8.2.24 Logos as layer

Logos are under the layer rules, you will have direct access to sengs by pressing the logo layer buon. You

have 2 logos layers buons available.

You can use the Pos/Size/Zoom adjustment buon and the Eect buon from the front panel too.