Instruction Manual

30
7.2.2 Audio


This mode turns your Eikos² into a true 10 x 2 scaled matrix, while preserving seamless switching capabilies.
Program 1 and Program 2 outputs can be set to dierent resoluons and rates. Switching between any of the
inputs can be done with the various eects (Cut, Fade, Slides…) and synchronized on both outputs.
This mode allows to display up to four live windows, while preserving seamless switching capabilies (not if
all 4 layers are displayed). Several templates are available.
In this secon, you will setup the audio of your device, you have several modes. In all modes, you have the
possibility to output the audio in AES3 or SPDIF:
NO AUDIO: the audio of your device is switched o
PRESET MODE: the standard mode of use of the device
You have two possibilies:
• Top layer: the sound on the output will follow the audio input of the top
layer.
• Breakaway: when breakaway is acvated, the audio on the output is
memorized into the preset. A change of preset, changes the audio on the
output. A change of content into a video layer has no eect on the audio.
ROUTING MODE: in this conguraon, simply choose an audio input to
assign it to the output. The audio conguraon remains the same during
the show.
In this example input1 is on out1 and input 2 is on out 2
7.2.2 Audio