User manual

Working with Mirror Modes

To use the Mirror mode, just perform your setting and operation from the Matrix output #1.

Nevertheless you can do manipulation on the output #2 at any time.

For a perfect use, set up the output format and rate for the output #2 as for the output #1 using the

synchronise button: Output 2 → Synch w/Out 1

The Mirror Matrix Mode is a specic Matrix Mode where the output #2 will be the perfect mirror

copy of the output #1. In that way, each settings apply to output#1 will be performed on the output

#2 too.

Mode Menu → Native Matrix mode menu → Mirror Mode

2- Clone mode: The output #1 and #2 will be the same. All changes on the

output #1 will be affected to the output #2. Layers will have

the same position and size.

For the ❶, ❷, ❸ & ❹ modes: Mirror Mode activated only for the PIP layer

All backgrounds are Frames

Using the Matrix Mode, several conguration are available, the Simple Mode and the Mirror Mode.

Using the Mirror Mode:

OUTPUT #1 OUTPUT #2

Select the PIP layer and go in the Layer menu, then select the “Layer Copy Mode” menu.

There are several mirror positioning options:

To use the Mirror Mode, simply select the Matrix Mode by the Main menu, then the Mirror Mode can

be activated thanks to the PIP layers menu.

1- No Copy: this mode is the standard Matrix Mode, output #1 and #2 are independent...

❶

❷

OUTPUT #1 OUTPUT #2

Frame